# Keyboard shortcuts

Mechbase is built to be driven from the keyboard. Page shortcuts are shown as small
key caps on their buttons, and don't fire while you're typing in a field or a dialog
is open.

**Anywhere**

| Key | Action |
|-----|--------|
| `J` · `⌘J` / `Ctrl+J` | Open or close the menu |
| `1` | Home |
| `2` | Routes |
| `3` | Needs attention |
| `4` | Hours |
| `5` | Points |
| `6` | Dashboards |
| `K` | Search |
| `Esc` | Back — up to the page above; also closes dialogs and the menu, and leaves a focused field first |
| `↑` `↓` `Enter` | Move through and pick from the menu, the installation picker, and pickers |
| `Enter` (`⏎`) | Submit the current form (sign in, save, create) |

**On a specific page**

| Key | Action | Where |
|-----|--------|-------|
| `E` | Edit | Section, asset, point, route |
| `Z` | Add a zone | Section page; an empty route |
| `P` | Add a measurement point | Asset page |
| `M` | Record a reading | Measurement-point page |
| `F` | Search | Readings list; Bearings |
| `N` | New route | Routes |
| `R` | Start / resume a route | Route page |
| `L` | Latest report | Route page |
| `H` | Route history | Route page |
| `⌘`/`Ctrl`+`Enter` | Post or save a note | Asset notes; reading and check notes |
